|
Aging and Assistive Tech. 
Slide Transfer Bathing Products
SLIDER BATHING SYSTEM
Go from the commode to bath and never transfer again!
Until now, making your bathroom fully accessible without a costly
major renovation was impossible... But the Assistive Technology
Inc. (ATI) Slider shower chair & tub frame system resolves that
problem. The Slider eliminates the need for costly "roll-in"
shower renovations and other family members don't lose access to
a bathtub.
| Go from commode to the shower and
never transfer. |
Roll patient into position next
to the tub and inter-lock to tub frame slide rails. |
Entire seat slides
over the tub! |
Remove the rolling chassis for easy
patient access.
Enjoy the shower! |
Slider Usage
The Slider consists of a rolling shower chair which inter-locks
with a removable support frame you place in the existing bathtub.
Position the chair next to your tub, inter-lock the rolling chassis
to the support frame slide rails, release the seat from the chassis
and slide the seat over your tub for a shower. When the seat is
positioned over the tub the care-giver can remove the rolling chassis
for easy access to the patient.
When the shower is complete, simply re-position the
rolling chassis next to the tub, inter-lock the chassis to the support
frame and slide the seat back onto the rolling chassis. Lock the
seat in place on the chassis and roll away. The Slider shower chair
system is easy to use and very cost effective.
Benefits of the Slider System
• Works with all existing standard size built-in tubs
• An inexpensive alterative to major renovations
• Full access to existing tub by other family members
• Rolls directly over any commode
• Comfortable & Secure feeling
• Eliminate additional transfers
Slider Features
• Total lock casters & pull-out foot rest
• Two swing away arms for lateral transfers
• Padded commode seat with open front for easy access to perinea
area
• Adjustable tension back support
• Push handle & seat belt standard
• Sliding seat functions in either direction
• Made from high quality Furniture Grade polyvinyl chloride
resin (PVC) tubing. • This advanced technology material will
not chip, dent, stain, peel, fade or sustain bacterial growth
• Available in a variety of Colors
Slider Options-Customization
The Slider is available in narrow, pediatric and extra wide versions.
In addition, we can custom fit the slider to fit over your non-standard
tub or commode, for heavier weights and to accommodate other dimensions
of your home/facility.
Default Slider Dimensions/Specifications
Remember, the Slider's dimensions can be customized to fit over
your non-standard tub or commode.
• Between arm rests: 17"
• Overall width: 21"
• Seat depth: 18"
• Seat to floor: 24"
• Tub Frame width: 31"
• Seat to foot rest: 18"
• Commode clearance: 18"
• Default weight capacity: 250 lbs. Heavier weights can be
accommodated in our custom products
Note: Specifications are subject to change without
notice. The right to technical alterations is reserved.
TILT-IN-SPACE SLIDER BATHING SYSTEM
The “Tilt-In-Space SLIDER” bathing system eliminates
expensive
“roll-in” shower renovations and back breaking bathroom
transfers.
The “tilt-in-space SLIDER” consists of a rolling chassis,
a transfer shuttle frame
with reclining seat/back and a removable tub frame you place in
your existing
bathtub. Simply roll the bather into position next to the tub and
interlock to the tub frame slide rails. Lock the casters securing
the rolling chassis to the tub frame, recline the seat, release
the transfer shuttle from the rolling chassis and slide the bather
over the tub. While positioned over the tub the care giver can remove
the rolling chassis for easy access to the bather. When bathing
is complete simply reposition the rolling chassis next to the tub
and interlock to the tub frame. Slide the transfer shuttle frame
back onto the rolling chassis and roll away. Two swing away arm
rests for lateral transfers. Works with any standard built-in bathtub.
Push handle, seat belt, pull-out footrest & 5" total lock
casters standard.
Remove the tub frame for unobstructed access to the
bathtub for non-assisted
bathing. Ideal for the candidate with little upper trunk control.
Sliding seat
functions in either direction. Adjustable tension back support.
Dimensions
Between arms: 18.5"
Overall Width: 21.5"
Overall length: 32"
Seat Depth: 18"
Seat to foot rest: 18".
Seat to floor: 24"
Seat to top of back rest: 36" standard
Weight capacity: 200 lbs
MINI TILT-IN-SPACE SLIDER BATHING SYSTEM
Designed specifically for the special needs child that
is too large to carry into the bath tub...or when a costly roll-in
shower renovation is not an option! The Mini Tilt-In-Space SLIDER
bathing system consists of a rolling chassis, a multi position tilt-in-space
shuttle seat and removable tub frame you position in your bath tub.
Simply roll the bather into position next to the tub and interlock
to
the tub frame, release the shuttle seat from the rolling chassis
and slide transfer over the tub. After the bather is positioned
over the tub the caregiver can remove the rolling chassis for unobstructed
access to the bather. When bathing is complete simply reposition
the rolling chassis next to the tub and interlock to the tub frame,
slide the shuttle frame back on to the rolling chassis and rollaway.
No permanent installation required!.
No more back breaking transfers or lifting in
a wet environment!
| Roll into position next to the tub. |
Interlock to the tub frame.. |
Tilt to a comfortable bathing position. |
Slide transfer over the tub. |
Mini Tilt-In-Space SLIDER Specs
Seat Height: Specify from 25” to 33”
Seat Depth: 14”
Seat width: 15.5”
Backrest Height: 21”
Backrest angle upright: 15 degrees
Overall length at fulltilt: 28"
Weight Capacity: 150lbs
Backrest angle at fulltilt: 45 degrees
Overall Length: 24” upright
Overall width: 21”
Mini Tilt-In-Space SLIDER Options
Customer specific seat height
Customer specific backrest height
Customer specific calf extension length
Head Bolsters
Torso harness or belt
Calf or ankle restraints
Narrow or Wide models available
Shown with optional 18” calf extension
1 seat belt standard
Non-slide transfer model available for roll in showers
BATH TRAX
The Assistive Technology Inc. (ATI) Bath Trax, a unique
assistive bathing and transport device especially designed for the
care- giver faced with a "high cost" bathroom renovation
because their pediatric or adolescent special needs patient is just
a little "too big" to carry into the bathtub. The
Bath Trax consists of a multi-position, mesh support sling carried
on a rolling chassis and a removable tub support frame.
| Roll patient into position next
to tub. |
Inter-lock to the tub frame. |
Slide patient over the tub. |
Easy access to the patient. |
Bath Trax Usage
Simply place the patient on the support sling/rolling chassis and
roll the patient into position next to the bathtub.
Inter-lock the rolling chassis to the tub support frame and slide
the patient over the bathtub. The care-giver then removes
the rolling chassis for easy access to the patient providing safe,
comfortable and secure bathing. The mesh support sling allows
water to drain directly into tub.
No more back breaking transfers or lifting your patient
in and out of the tub. The Bath Trax system works with any standard
bathtub and other family members can simply remove the tub support
frame for full access to the bathtub.
Benefits of the Bath Trax System
• Works with all existing standard size built-in tubs
• An inexpensive alterative to major renovations
• Full access to existing tub by other family members
• Rolls directly over any commode
• Comfortable & Secure feeling
• Eliminate additional transfers
• Made from high quality Furniture Grade polyvinyl chloride
resin (PVC) tubing
• This advanced technology material will
not chip, dent, stain, peel, fade or sustain bacterial growth
Bath Trax Options-Customization
We can custom fit the Bath Trax to to accommodate heavier weights,
commode/tub dimensions and other dimensions of your home/facility.
Options include:
• Closed cell foam head bolsters
• Calf rest extension
• Torso restraint and ankle straps
• Contact us for custom adaptations
Default Bath Trax Dimensions/Specifications
Remember, the Bath Trax's dimensions/specifications can be customized
to fit over your non-standard tub or commode.
• Support sling – 18.5” wide, 40” long
• Rolling chassis – 23” wide, 29.5” long
• Five position elevating back rest and 3 position seat will
support a patient up to 110 lbs. and 60” tall with optional
calf extension
• Torso belt standard
Note: Specifications are subject to change without
notice. The right to technical alterations is reserved.
|
