Pharmacy and IV Therapy

IV Admixture: Equipment, Disposables

 

 

IV Admixture and IV Therapy Accessories

Filtration

Oncology Preparation and Administration

PharmAssist Pump Batching System

Related Equipment

 

 

 

 

 

 

 

IV ADMIXTURE AND IV THERAPY ACCESSORIES
A comprehensive line of disposable items utilized in IV admixture preparation that improve simplicity, safety, speed and cost-effectiveness.

 

    

IV Drug Transfer

Cat. No. Description Case Size

901300-50

901300

 Taky-Spike Plus IV Transfer Green. IV transfer pin for addition and withdrawal reconstitution. Green hinge cap over luer connector for capping of medication and storage in between use. Slim, short strong spike for easy, secure gripping and ease of piercing.

50/cs

200/cs
19TP Suregrip™ transfer pin, large bore, rapid transfer 100/cs
19MTP Suregrip™ transfer pin, small bore for drug vial reconstitution 100/cs
19MMTP Suregrip™ transfer pin, mini bore for drug vial reconstitution 100/cs
HP2402 PharmAssure transfer pin, small bore (with hinged cap) for drug reconstitution 50/cs

 

901300

19TP, 19MTP, 19MMTP

HP2402

Chemo Drug Transfer
Healthmark supplies various chemotherapy reconstitution spikes to satisfy user preference. All chemo spikes incorporate 0.2 micron hydrophobic filters which are recommended to prevent blow back and trap chemo aerosols. Chemo spikes also provide venting and faster flow rate. Product variables include filter surface area, flow rate (smaller vs larger bore spike) ease of gripping and manipulation by the user, and various add-on options including additional 5 micron hydrophilic filter for added safety and needle-free swabbable valve for closed system multi-dose access.

Cat. No. Description Case Size
TS350 Codan Chemoprotect® IV/Chemo transfer spike with 0.2 micron hydrophobic filter. 50/cs
TS350-5 NEW Codan Chemoprotect® IV/Chemo transfer spike with 0.2 micron hydrophobic filter in sterile 5-packs for volume users who don’t want to open each individual package. Same chemo spike as TS350 above except has detachable cap instead of hinged cap. 500/cs
(100 x 5 packs)
TS350N Codan Chemoprotect® IV/Chemo transfer spike with 0.2 micron hydrophobic filter and swan lock needle-free connector for unique closed system multi-dose access. 50/cs
901322 Taky-Spike Plus Chemo Red. Chemo transfer pin - highest quality with 0.2 micron large surface area hydrophobic filter for protection against toxic aerosols and integral 5 micron particulate fluid filter for added safety. Red hinge cap cover over luer connector to indicate chemo drug and for enclosure in between use. Slim, short, strong spike for easy, secure gripping and ease of piercing. Opening at bottom close to end of spike so that maximum drug can be withdrawn. Integral airvent filter for reliable protection against microbial contamination. Suitability for cytostatics has been tested. Note: Withdrawal may be slightly slower with some drugs due to added benefit of particulate filter in-line.  
19CHTP Chemo transfer pin with 0.2 micron hydrophobic filter, Suregrip™ (for large chemo vials) 100/cs
DP5201V Vial venting system, plastic (for small chemo vials) 50/cs

 

 

TS350, TS350-5, TS350N

901322

19CHTP

  

Pistol Fluid Dispensing System
A spring loaded syringe gun for transferring diluents and dosing of injectable drugs. Includes spring loaded syringe gun, 42 inch transfer set with vented spike, clamp and dual check valve plus Flow-Eze vent needle.

Cat. No. Description Case Size
P2000 Designed for repetitive fluid dispensing needs. Automatic spring return saves filling time. Unique volume adjuster for precise settings. Ergonomic handle for reduced hand fatigue. Accurate, fast and simple to use. 25/cs

 

P2000

  

Pharmacy Transfer Sets
For addition of drug or diluent from bulk container measured through a syringe into vials or I.V. bags. Note: Both products have same function. Valve system eliminates stopcock manipulation.

Cat. No. Description Case Size
3004 PharmAdd Transfer Set.
Dispensing spike extension set with vent/no vent option, high flow stopcock, slide clamp and luer lock connector.		 50/cs
3002 Multiple Additive Set.
Dispensing spike extension set with valve mechanism, slide clamp and luer lock connector.		 50/cs
3046 Spike/Spike Transfer Set.
12 (31cm) inch transfer set with high flow tubing, two non-vented small spikes and clamp.		 100/cs
3024 Transfer Set with 0.2micron Filter.
18 inch transfer set with vented spike, 0.2 micron hydrophilic filter and male luer connector for transfer from bag to bag. 		100/cs

 

3004

3002

3046

3024

Transfer Valve Sets
Transfer valve sets allow for withdrawl of various volumes of diluent or injectable medications into syringes. Available with two-way valve mechanism to allow for syringe volume adjustment or one way valve to eliminate potential for medication or diluent to re-enter the I.V. bag.

Cat. No. Description Case Size
3005 One-way transfer valve. Non-vented with hinged cap 100/cs
19TPV Two-way transfer pin valve. Vented for use with I.V. bottle. 100/cs
3006 Two-way transfer pin valve. Non-vented. 100/cs

 

3005, 19TPV, 3006

  

Injection Site Valve
Attach needle size of choice to the valve luer connection and insert into injection port of I.V. bag. Attach syringe to add or withdraw diluent or medication to or from I.V. bag.

Cat. No. Description Case Size
6039BV Injection site transfer valve 50/cs

 

6039BV

  

Syringe Tip Caps
Syringe tip caps in sterile peel back trays allow sterile removal of caps as required. Integral luer cap to fit both luer tip and luer lock syringes. Recessed luer minimizes syringe tip contamination. Ideal for syringe batching operations.

Cat. No. Description Case Size
682119 40 trays of 25 1000/cs
682101 100 trays of 10 1000/cs
DD-001-25 Syringe Cap Tray Luer Lock (21 caps per tray- 100trays/cs). Red luer syringe caps in bulk trays for efficient, sterile batch capping of syringes. 2100 caps /cs

 

682119, 682101

DD-001-25

  

Combi Cap™
Combi-cap™ device: Multi-functional male/female luer lock closure for I.V. syringes, catheters and I.V. sets. Individually packaged.

Cat. No. Description Case Size
IV2100R Red 100/cs

 

IV2100

  

TampAlert™ Syringe Cap
Breakaway sleeves indicate tamper evidency. Ideal for batching.

Cat. No. Description Case Size
TEC10 10 trays of 10 100/cs

 

TEC10

  

Vent Needle
Flow-Eze vented needles for preventing a pressure build up when reconstituting drug vials. Eliminates spilling over of product on the surface and avoids contamination potential. Unique lateral flow design directs diluent against side walls to minimize foaming.

Cat. No. Description Case Size
19C01 Flow-eze Vent needle 100/cs
19C Flow-eze Vent needle 500/cs

 

19C01

  

Stopcock
For miscellaneous pharmacy drug preparation applications.

Cat. No. Description Case Size
50013 High flow 3-way stopcock 100/cs

 

50013

  

Syringe Tip Adaptors
Universal syringe tip adaptor for syringe to syringe transfers. Recessed slip on connection point allows user to change syringes quickly and capped luer connection point reduces touch contamination and provides secure fit. Fits into syringe filling stand holder for hands free operation when batching syringes.

Cat. No. Description Case Size
SA50 Soft plastic design (luer slip) 50/cs
SA250 Soft plastic design (luer slip) 250/cs
5003 Hard plastic (l” length, luer/luer) 100/cs

 

SA250, 5003

  

Intravenous Immune Globulin Preparation Set
Simplifies preparation of I.V./I.G. spike the vented leads into the drug vials, hang and allow to drain by gravity into one litre bag. Detach the leads and seal with screw-on connector. Transfer bag is now patient ready.

Cat. No. Description Case Size
66100 One litre empty sterile bag with two leg gravity vented set. 50/cs

 

66100
66100

  

Ampoule Breakers
Safebreak™ - Disposable ampoule breakers available in various sizes. Plastic fracture and safe collar for breaking pre-scored glass ampoules. Tip of broken ampoule is retained in plastic collar for disposal. Designed to protect personnel against glass splinters and prevent cross contamination.

Cat. No. Description Case Size
SB140 1 to 4ml 100/cs
SB510 5 to 10ml 100/cs
SB1120 11 to 20ml 100/cs

 

Ampoule breakers

  

Multi-Dose IV Bag Rings
Durable, resilient round plastic rings for keeping multiple minibags together during transport from pharmacy to nursing units in a CIVA program. Choice of colours allows for colour coding system options.

Cat. No. Description Case Size
PC2116 I.V. bag ring colours: black, blue, brown, green, orange, pink, purple, red, white and yellow. 500/cs

 

PC2116

  

Sampling Site Couplers

Cat. No. Description Case Size
3021 For pharmacy or I.V. applications after the spike administration port has been accessed. The sampling site coupler can be inserted to provide bag closure and allow for additional injection or sample port. 100/cs

 

3021

  

Needleless Vial Adaptor Access Device

Cat. No. Description Case Size
SM-007 Vial Access Device with needle-free SmartSite™ valve for multiple withdraws or additions of fluid to and from vials, swabable septum, easy, secure connection for 22 mm vials. 50/cs

 

SM-007

  

Needleless IV Bag/Bottle/Set Access Devices

Cat. No. Description Case Size
SM-013 Large Non-Vented Spike w/ SmartSite® Needleless Valve 50/cs
SM-016 Large Vented Spike, 0.8 micron vent cap, SmartSite® Valve 50/cs
SM-017 Large Non-Vented spike w/ backcheck valve, female luer lock, SmartSite® Valve, 7”. 50/cs
SM-009 T-connector with SmartSite® Valve, 6” microbore tubing w/ luer lock non-removable slide clamp, female luer lock. 50/cs

 

SM-013
sm-013

  

Vented Spike Transfer Set

Cat. No. Description Case Size
3008 10” transfer set with vented administration spike, pinch clamp and female luer connector for transfer of drug solutions. 100/cs
3020 24” transfer set with vented administration spike, roller clamp and male luer connector for transfer of drug solutions. 100/cs

 

3008

3020

Two Way Transfer Devices

Cat. No. Description Case Size
19DTP Double ended plastic transfer pin (16G).
Double ended, vented, high speed, closed system transfer of I.V. additives		 100/cs
204005 Double ended metal transfer needle (20G).
Facilitates transfer of medication from one container to another		 500/cs

 

19DTP, 204005

  

Empty Sterile (Drug Admixture) Bags
Empty sterile 2–port bags (injection site and patient access spike port) for filling through injection port. Latex Free, Individual pouches.

Cat. No. Description Case Size
66040 100ml (EVA) 50/cs
66045 250ml (EVA) 50/cs
66050 500ml (EVA) 50/cs
58719 100ml (Non DEHP) 200/cs

 

66040
66040

  

Empty Sterile Glass Vials
Empty sterile glass vials available in clear and amber in compact, durable trays. De-pyrogenated dry heat sterilization process (no drop of liquid inside) without cap for use in clinical trials. One ml is 11mm size, two ml 13mm and all others 20mm.

CLEAR
Cat. No. Description Case Size
ESV01 1ml Empty Sterile Glass Vial 1000/cs
ESV02 2ml Empty Sterile Glass Vial 100/cs
ESV05 5ml Empty Sterile Glass Vial 25/cs
ESV10 10ml Empty Sterile Glass Vial 25/cs
ESV30 30ml Empty Sterile Glass Vial 25/cs
ESV50 50ml Empty Sterile Glass Vial 25/cs
ESV100 100ml Empty Sterile Glass Vial 25/cs

AMBER
Cat. No. Description Case Size
ESV02A 2ml Empty Sterile Glass Vial 100/cs
ESV05A 5ml Empty Sterile Glass Vial 25/cs
ESV10A 10ml Empty Sterile Glass Vial 25/cs
ESV30A 30ml Empty Sterile Glass Vial 25/cs
ESV50A 50ml Empty Sterile Glass Vial 25/cs
ESV100A 100ml Empty Sterile Glass Vial 25/cs

 

Empty sterile
glass vials

 

Minibore Extension Set

Cat. No. Description Case Size
6032 Use with CADD pump reservoir sets (50ml and 100ml). 45” length with one clamp and two male luer connectors. Internal volume 0.8ml.
Note: 30 and 60 inch available 		100/cs

 

    

Minibore Extension Set With Anti-Relux Valve

Cat. No. Description Case Size
6032V

45” length with one clamp and two male luer connectors. Internal volume 0.8ml.
Note: 30 and 60 inch available.

 100/cs

 

    

Injection Port (PRN Adaptor)

Cat. No. Description Case Size
6022

Resealable male luer injection port (short)

 100/cs

 

6022

  

Extension Set: Microbore Tubing Set

Cat. No. Description Case Size
6003

60” length with one clamp, female luer and male luer connectors. Internal volume 0.45ml.

 100/cs

 

6003

  

Anesthesia: Male/Female luer Cap Protector

Cat. No. Description Case Size
6008

One male cap and one female luer individually packaged.

 200/cs

 

6008

  
 

 

    

 

FILTRATION

Widest Range of Hospital Pharmacy Filters Available
• Hydrophilic (bacteria and particulates) and Hydrophobic (air venting and chemo aerosol entrapment)
• Filter needles and ampoule aspirators
• Specialty filters: TPN – 1.2micron for lipids and 5 micron multi-add injection port for additives; large volume/high flow for pharmacy batching; solvent resistant and other applications.

 

 

 

 

 

    

Standard Disposable Disc Filters (Pall brand): Hydrophilic

Cat. No. Description Case Size
IV2500 0.2micron, double luer lock – designed for bacteria filtration and particulate retentive applications. Low protein binding. 50/cs
HP1002 0.2micron, double luer lock – designed for bacteria filtration and particulate retentive applications. Low protein binding. Incorporates supor membrane for higher flow rates. 50/cs
IV4500 0.45micron – designed for particulate retentive applications. Low protein binding. 50/cs
IV5500 5micron – designed for coarse filtration of solutions with high particulate levels, versapor high flow membrane. 50/cs
IV8500 0.8micron – designed for pre-filtration and particulate removal above 0.8micron, versapor high flow membrane. 50/cs
IV1200 1.2micron – 3 in 1 hyperalimentation filter designed for particulate and fungus removal above 1.2micron, without damaging the lipid emulsion. 50/cs

 

    

Standard Disposable Disc Filters (Pall brand): Hydrophobic

Cat. No. Description Case Size
IV6500 0.2micron – designed for sterilization, bacteria retention and venting of air. 50/cs

 

    

Filter Applications: Filter Needles

Cat. No. Description Case Size
IV1518 Filter needle 18 gauge x 1.5”, 5micron filter for medication filtration – with specially constructed stainless steel, cup shaped, non-shedding, micropourous sintered depth filter. Unique anti-coring needle point. 100/cs
IV1520 Filter needle 20 gauge x 1.5”, 5micron filter for medication filtration – with specially constructed stainless steel, cup shaped, non-shedding, micropourous sintered depth filter. Unique anti-coring needle point. 100/cs
305208 Intermittent infusion plug with 5micron filter provides an additional route to eliminate multiple punctures when doing multiple additives and also incorporates benefit of filtration. 18 gauge x 1”. 100/cs

 

IV1518, IV1520, 305208

 

Filter Applications: Filter Aspirator

Cat. No. Description Case Size
FS-175B

Filter Straw (flexible plastic 2.5 inch length) 5 micron for needle-free aspiration of glass particles and other particulates from ampoules.

 100/cs
FS-400B

Filter Straw (flexible plastic 5 inch length) 5 micron for needle-free aspiration of glass particles and other particulates from ampoules.

 100/cs
IV1530

Filter aspirator 18 gauge x 3” blunt needle, 5micron filter for filtration from ampoules with specially constructed stainless steel, cup shaped, non-shedding, micropourous sintered depth filter. Stainless steel blunt needle.

 100/cs
FS-142

Filter straw with injection site (5 micron flexible plastic 4 inch length).

 100/cs

 

FS-175B, FS-400B

  

Filter Applications: Other

Cat. No. Description Case Size
FL1000FM Large surface area 0.2micron bacterial retentive filter, high pressure, luer lock design for large volume I.V. admixture batching procedures; large surface area allow for faster flow through and greater capacity to trap particulates before filter plugs. (female luer/male luer ends). 100/cs
FL1000LL Large surface area 0.2micron bacterial retentive filter, high pressure, luer lock design for large volume I.V. admixture batching procedures; large surface area allow for faster flow through and greater capacity to trap particulates before filter plugs. (2 female luer connectors). 100/cs
FL1001FM Large surface area 1.2 micron filter size to accommodate lipid emulsions, high pressure, luer lock design for large volume I.V. admixture batching procedures; large surface area allow for faster flow through and greater capacity to trap particulates before filter plugs. (female luer/male luer ends). 100/cs
118059 Sterile 5micron filter connector permits in-line filtration of particulate matter at point nearest patient. Connects to I.V. placement devices. 100/cs

 

 

 

FL1000FM

  

 

ONCOLOGY PREPARATION AND ADMINISTRATION

Healthmark offers the most comprehensive line of Oncology Preparation and Administration products available. All of the ChemoSafety products meet or exceed recommended professional and regulatory guidelines for safe handling of cytotoxics including ASHP, OSHA, CSHP and ONS.

Below is a listing of our most commonly used, safe and cost-effective products for the preparation and administration of Oncology drugs. Healthmark supplies products from different manufacturers to satisfy customer needs related to cost-effectiveness, specialty purpose applications, and quality.

To accommodate user preferences we carry several brands of Chemo gowns, gloves, transfer pins, spill kits and other products. Many additional available products are not listed. Our order desk or sales staff can suggest alternatives based upon your needs.

Please call our order desk for a colour brochure and/or to receive samples or product safety guidelines.

 

    

Chemo Drug Transfer
Healthmark supplies various chemotherapy reconstitution spikes to satisfy user preference. All chemo spikes incorporate 0.2 micron hydrophobic filters which are recommended to prevent blow back and trap chemo aerosols. Chemo spikes also provide venting and faster flow rate. Product variables include filter surface area, flow rate (smaller vs larger bore spike) ease of gripping and manipulation by the user, and various add-on options including additional 5 micron hydrophilic filter for added safety and needle-free swabbable valve for closed system multi-dose access.

Cat. No. Description Case Size
TS350 Codan Chemoprotect® IV/Chemo transfer spike with 0.2 micron hydrophobic filter. 50/cs
TS350-5 NEW Codan Chemoprotect® IV/Chemo transfer spike with 0.2 micron hydrophobic filter in sterile 5-packs for volume users who don’t want to open each individual package. Same chemo spike as TS350 above except has detachable cap instead of hinged cap. 500/cs
(100 x 5 packs)
TS350N Codan Chemoprotect® IV/Chemo transfer spike with 0.2 micron hydrophobic filter and swan lock needle-free connector for unique closed system multi-dose access. 50/cs
901322 Taky-Spike Plus Chemo Red. Chemo transfer pin - highest quality with 0.2 micron large surface area hydrophobic filter for protection against toxic aerosols and integral 5 micron particulate fluid filter for added safety. Red hinge cap cover over luer connector to indicate chemo drug and for enclosure in between use. Slim, short, strong spike for easy, secure gripping and ease of piercing. Opening at bottom close to end of spike so that maximum drug can be withdrawn. Integral airvent filter for reliable protection against microbial contamination. Suitability for cytostatics has been tested. Note: Withdrawal may be slightly slower with some drugs due to added benefit of particulate filter in-line.  
19CHTP Chemo transfer pin with 0.2 micron hydrophobic filter, Suregrip™ (for large chemo vials) 100/cs
DP5201V Vial venting system, plastic (for small chemo vials) 50/cs

 

 

TS350, TS350-5, TS350N

901322

19CHTP

  

ChemoPro Gowns (latex-free)
ChemoPro gowns combine low permeability protection and breathability for long wearing comfort. The gown has woven knit cuffs for comfort under gloves;non-linting fabric to eliminate the hazards of air-borne contaminants; a wrap around style that covers the back; a high, secured neckline; longer length and all-around superior quality.

Note: Following is a list of recommended, routinely used products for the preparation and administration of chemotherapy. For additional chemo products contact Healthmark Ltd. for a Chemotherapy Catalogue.
Cat. No. Description Case Size
CST200U ChemoPro D Barrier Gown Unisize 25/cs
CST200X ChemoPro D Barrier Gown X-Large 25/cs

 

    

Impervious Gowns (latex-free)
The poly-coated gown is available for when extra protection is necessary, especially when working with alcohol based drugs. Combines all of the features of the ChemoPro gown but incorporates a coated impervious layer.

Cat. No. Description Case Size
CST210U ChemoPro P Impervious Gown Unisize 25/cs
CST210X ChemoPro P Impervious Gown X-Large 25/cs

 

    

Chemotherapy Prep/Injection Site Mats
Drug preparation or drug administration. Highly absorbent. Moisture proof polybacking. Meets OSHA standards. Two sizes. Non-linting materials. Convenient dispenser packaging.
Cat. No. Description Case Size
CST400-100 11” x 19” 100/cs
CST402 19” x 22” 50/cs

 

    
Chemo Gloves
Blue, latex, powder-free, low protein chemo glove with texture finish to provide maximum protection when preparing chemotherapy drugs. Features 18mil thickness. All gloves are 100% inspected for pinholes. Hand specific.
Cat. No. Description Case Size
CST381 Small 50pr/cs
CST386 Medium 50pr/cs
CST391 Large 50pr/cs
CST396 X-Large 50pr/cs

 

    

Chemo Nitrile Latex-Free Gloves
Purple, latex-free glove, 12” length, 8mil thickness. For pharmacy preparation or nursing administration.

Cat. No. Description Case Size
CST310 Small 100 gloves/cs
CST312 Medium 100 gloves/cs
CST314 Large 100 gloves/cs

 

    
Mist Respirator Mask (N95)
Mask designed for protection against cytotoxic agents and contaminated airborne particles down to 0.5 micron.
Cat. No. Description Case Size
CST550 Mist respirator mask, filter to .5 micron 40/cs

 

    
Chemo Spill Kit
A standard for every facility. Contains all items to handle spills in accordance with standard guidelines.
Cat. No. Description Case Size
CST700 Exceeds OSHA standards. Kits contain: shoe covers, 1 pair medium duty latex gloves, 1 pair heavy duty latex gloves, mist respirator mask, eye protection, absorbent poly backed sheets, signs, labels, chemo absorbent polymer, incident report form. Packaged in a 2 gallon leak proof disposal container 4 kits/cs

 

    

cytotoxic stickerCytotoxic Labels
Approved cytotoxic symbol (red on black). Ideal for putting onto ziplock bags for chemo transport.

Cat. No. Description Case Size
CL1.5x1 1.5” x 1” 2000/roll
CL2x2 2”x 2” 2000/roll
CL4x4 4” x 4” 1000/roll

 

    

Transport, Storage and Disposal

transport bag

Cat. No. Description Case Size
Q134 Clear, pre-labeled, 4mil transport bag, 6” x9” 1000/cs
Q455 Clear, pre-labeled, 4mil transport bag, 9” x 12” 500/cs
Q135 Clear, pre-labeled, 4mil transport bag, 12” x 15” 500/cs
CST610 White, pre-labeled chemo waste bag, 30 gallon 50/cs
CST815 White, plastic container, removable lid, 2 gallon 12/cs

 

    

Safety Syringe Disposal
Individual syringe disposal container with tamper evident seal.

Cat. No. Description Case Size
CST2000 SGT Safety Tube 9” x 1” 100/cs

 

    

Contamination Control Wipers

Cat. No. Description Case Size
TX3211 Sterile dry wiper 9” x9” 500/cs
TX3212 Sterile dry wiper 12” x12” 500/cs
TX3285 Sterile pre-wetted wiper w/ 70% IPA 9” x 9’ 400/cs

 

    

Chemo Eye Protection

Cat. No. Description Case Size
CST500 disposable chemo glasses 36/cs

 

    
Chemotherapy Labels & Signs
Meaningful, non-alarming wording. Distinct color-coding. Established, internationally recognized warning symbol.
Cat. No. Description Case Size
CST100 Chemo Label .5” x 2.5”, 1000/roll 4 rolls/cs
CST105 Chemo Label 1” x 3”, 1000/roll 4 rolls/cs
CST110 Chemo Label 2” x 3”, 1000/roll 4 rolls/cs
CST115 Chemo Label 1” round, 1000/roll 4 rolls/cs
CST120 Chemo Sign, “Chemo Area”, 5” x 6” 50/cs
CST125 Chemo Sign, Patient Chart, “Begins/Ends”, 5” x 7” 50/cs
CST130 Chemo Sign, “Flush Twice”, 5” x 7” 50/cs

 

    

Combi Cap

Cat. No. Description Case Size
IV2100 Individually packaged, hard plastic, male/female luer lock syringe caps in red chemo color. 200 per case

 

IV2100
iv2100

  

ChemoTest™
Chemo Drug Preparation Technique Validation/Verification. Validate the technique of health care workers who manipulate hazardous drugs. Uses fluorescein dye and a UV light to detect breaks in safe technique and effectiveness of hazmat clean up procedures. The ChemoTest verifies the safe preparation of hazardous drugs using specific devices and negative-pressure containment techniques and validates correct use of safety equipment, spill cleanup kits, and disposal procedures.

Quality Assurance

Cat. No. Description Case Size
CT9530 3mL and 50mL vials 5/cs
CT9000 Mini Ultra Violet light, for use with ChemoTest #CT9530. Uses 4 AA batteries, not included each

 

    

 

 

 

PHARM-ASSIST
Excelsior Pharm-Assist Automated Dispensing Pump
The PharmAssist Pump is ideal for CIVA batching of antibiotics including reconstitution into bulk gram vials and filling minibags or syringes. The PharmAssist is also used for other applications including batch preparation of epidural infusions into syringes or bags, filling saline and heparin syringes, transferring large volumes, filling ambulatory devices, transferring lipid emulsions and other miscellaneous applications.

Features:
• +/- 1% accuracy
• user friendly; easy to program and use
• simple calibration procedure
• store up to 20 programs in memory
• one pump chamber set for full range (0.5ml to 9999ml)
• minimal key stroke entries saves time
• unique functions (ie. source container, syringe label library, pump dilute to reduce pressure buildup, forward/reverse, etc.)
• foot pedal included
• backlit display and color coded keypad
• vertical placement of roller head to avoid spill damage
• state of the art electronics
• lightweight, reliable, maintenance free
• Healthmark “no charge” loaner program to avoid downtime

Cat. No. Description Case Size
SP1000 Excelsior Pharm-Assist automated dispensing pump each
PS01 Pharm-Assist pump stand each
SH01 Syringe filling holder block each
PA01 Single lead pumping chamber set 30/cs
PA02 Dual lead pumping chamber set 25/cs
PA03 Triple lead pumping chamber set 25/cs
OLGT8 Oral liquid tubing set – silicone (one glass tip per case) 8/cs
GT01 Glass tip for oral liquid tubing set each
LPA01 Lipid pump set (non-phalate tubing, 0.2 micron hydrophilic filter) 30/cs
PA01LL Oral liquid luer/luer pump chamber set 30/cs

 

    

Labelling

Cat. No. Description Case Size
PRINT Thermal label printer each
TPC Hand held thermal label applicator each
PAB-X Thermal labels /roll (X = Yellow or Blue) 16 rolls
DOT Thermal DOt labels 2000/roll (yellow).
Labels go on top of syringe plunger to indicate expiry date change		 16 rolls

 

    

Empty Sterile Mixing Bag

Cat. No. Description Case Size
58719 100ml empty sterile bag 200/cs
58717 250ml empty sterile bag 50/cs
58718 500ml empty sterile bag 50/cs
58764 1,000ml gravity bag 2 leads (for mixing IVIG) 50/cs
58714 1,000ml empty sterile bag 50/cs
58715 2,000ml empty sterile bag 50/cs
58716 3,000ml empty sterile bag 50/cs

 

58764

  

Syringe Batching Trays and Tip Caps

Cat. No. Description Case Size
501459 1cc pharmacy syringe tray (25 per tray) 1000/cs
513207 3cc pharmacy syringe tray (25 per tray) 200/cs
516200 6cc pharmacy syringe tray (25 per tray) 200/cs
512258 12cc pharmacy syringe tray (25 per tray) 200/cs
520251 20cc pharmacy syringe tray (25 per tray) 200/cs
535101 35cc pharmacy syringe tray (10 per tray) 120/cs
560232 60cc pharmacy syringe tray (10 per tray) 120/cs
682119 Syringe tip cap (25/tray, 40 trays) 1000/cs

 

    

Accessories

Cat. No. Description Case Size
FL1000FM 0.2 micron pharmacy batching filter
(high pressure, large surface)		 100/cs
SA250 Syringe filling adaptor 250/cs
200052 Straight needle (16G) for connection to mixing bag 100/cs

 

 

 

    

 

RELATED EQUIPMENT
Healthmark supplies complementary equipment utilized in the IV admixture preparation process including vial reconstitution mixers, shakers and weigh scales.

Vial Reconstitution Mixers and Shakers
Mechanical devices that mix drug vials to dissolve the powder into solution. Speeds up the process of reconstitution, saves pharmacy technician time and reduces repetitive motion. The MediMix rolls vials for smooth mixing that is ideal for Oncology, IV/IG and other products that require gentle mixing to prevent breakdown of drug molecules. The VRS1000 shakes vials and is ideal for large batch reconstitution of antibiotics.

 

MediMix
Cat. No. Description Case Size
MM100 MediMix100 – table top vial reconstitution mixer. Accommodates 6-18 vials depending on size. Ideal for mixing IV antibiotics, IV/IG, Oncology and other injectable drugs that require gentle mixing. each
VRS1000 Vial Reconstitution Shaker. Large Reciprocating Shaker (16.5 x 11” x 9”, 42lbs) suited for volume antibiotic batch mixing programs. each

 

    

Acculab Weigh Scale
Portable top load weigh scale for standard pharmacy procedures. High quality performance and value. Ideal for weighing mixing bags to confirm accuracy in drug batching procedures.

Cat. No. Description Case Size
VIC212 250 gram capacity (+-0.01 gram accuracy) each
VIC4KG 4,000 gram capacity (± 1 gram accuracy) each
VIC6KG 6,000 gram capacity (± 1 gram accuracy) each